| The
overpass is 125.5 metres from abutment to abutment and
the bridge is approximately 9m to the top of the slab.
RMD’s Megashor was used as beams
to span from the abutment wall over the batter to the
Rapidshor. The Rapidshor shoring system was used for soffit
support. Alform Beam was used as primary bearers on a
deck that was used under the Megashor, as a working deck
and for access.
Special hinge assemblies made from Super
Slim Soldiers were used to allow for the adjustment of
side form wings.
Approximately 90,000kg of Rapidshor
and Super Slim Soldiers were supplied to the site for
Stage 2.
RMD Australia were chosen to support
this project because the client was highly satisfied with
the previous service provided by RMD Brisbane.
|
